Item 7.1 - Attachment 1 |
Development
Application Variations under SEPP 1 - August-September 2010 |
Development
Application Variations under SEPP 1 – Approved in August-September 2010
DA No: |
Address: |
Category of development: |
Environmental Planning Instrument |
Development standard to be varied |
Justification of variation |
Extent of Variation |
Date DA determined |
DA/333/2010 |
1C |
Residential 2(a) |
PLEP 2001 |
Clause 39 –
Height Control Required – 3 storey Proposed – 2 storey |
The proposed works are consistent with the objectives of the
PLEP 2001 and the PDCP 2005, and are considered satisfactory in terms of
design, overshadowing, bulk and scale.
The development provides sufficient landscaping and open space
areas. The new dwelling is
appropriately sited without impacting on adjoining properties. The non compliance is a technical non compliance
due to the definition of a storey under PLEP 2001, which defines any subfloor
area greater than 1.2 metres above ground level as a storey. The non-compliance is due to the sloping
nature of the site, resulting in part of the subfloor area being a maximum of
1.4m above natural ground level together with the lift shaft. |
1 storey |
Council
Meeting 13 September 2010 |
DA/552/2010 |
|
Residential 2(c) |
PLEP 2001 |
Clause 40
Floor Space Ratio Required: 0.5:1 Proposed: 0.54:1 |
The proposed dwelling has a floor space ratio of 0.54:1 which
equates to a floor area of 213.5m2.
While the proposed additions will result in the dwelling exceeding the
FSR standards for dwellings of 0.5:1, the land is zoned 2(c) which permits
residential flat buildings with an FSR of 0.8:1. |
FSR 8% |
Council
Meeting 13 September 2010 |