|
Item 8.2 - Attachment 1 |
Development
Application Variations under SEPP 1 - Approved in March 2011 |
Development
Application Variations under SEPP 1 – Approved in March 2011
|
DA No: |
Address: |
Category of development: |
Environmental Planning Instrument |
Development standard to be varied |
Justification of variation |
Extent of Variation |
Date DA determined |
|
795/2010 |
|
Dwelling |
PLEP 2001 Zone – Res 2A |
cl.38(1)(a) – minimum allotment size 550m2 |
The lot already exists and was approved by Council in 1996. |
27m2 (5%) |
14 March 2011
at Council meeting |
|
973/2010 |
|
Dwelling (adds/alts) |
PLEP 2001 Zone – Res 2A |
cl.39(1)– maximum height 2 storeys |
The subfloor foundation area
of the existing dwelling protrudes above the natural ground level by a
maximum of 1.3m on the south-eastern elevation. As such the non-compliance is
a direct result of the subfloor area that exists below the existing dwelling
due to the slope of the allotment. The additional height does not result in
any adverse bulk or scale impacts. |
1 storey (50%) |
14 March 2011
at Council meeting |
|
943/2010 |
|
Dwelling |
PLEP 2001 Zone – Res 2B |
cl.38(1)(a)(b) – minimum allotment size 550m2 |
The lot already exists and was approved by Council in 1988. |
81m2 (14.7%) |
14 March 2011
at Council meeting |
|
907/2010 |
|
Dwelling (adds/alts) |
PLEP 2001 Zone – Res 2A |
cl.39(1)– maximum height 2 storeys |
The subfloor foundation area
of the existing dwelling protrudes above the natural ground level by a
maximum of 2.5m on the south-eastern elevation. As such the non-compliance is
a direct result of the subfloor area that exists below the existing dwelling
due to the slope of the allotment. The additional height does not result in
any adverse bulk or scale impacts. |
1 storey (50%) |
14 March 2011
at Council meeting |